8
BATTERY REMOVAL
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing
the battery.
• Ensure the trimmer is discharged of all power.
• Firstly, pry the detail blade head housing using a single-side screwdriver.
• Using a small screwdriver, unscrew 2 screws on the back housing of the
trimmer.
• Continuously pry the front housing using the single-side screwdriver.
• Pry the PCB holder assembly again using the single-side screwdriver from
the back housing so you can see the PCB and batteries exposed.
• Destroy the PCB holder using a wire cutter, cut the tabs on both ends of the
battery assembly and remove the PCB.
• Dispose of the batteries safely.
SUITABLE FOR USE IN BATH OR SHOWER.
This appliance conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
