![background image](http://html1.mh-extra.com/html/remington/476/476_operating-instructions-manual_1438522015.webp)
15
Safety Precautions
Overdriven Fasteners
An overdriven fastener results when too
strong of a powder load is used causing
the piston to extend past the muzzle.
Move to the next lightest powder load.
Repeated overdrive will damage your
tool. By avoiding overdrive, you can ex-
tend the life of your tool considerably.
NOTE: NEVER fire the tool without a
fastener. This can damage the tool and/
or cause possible injury to the operator.
IMPORTANT: If the tool does not open
after firing and the piston is overdriven,
see
Piston Overdrive, page 18.
➀
➁
LOAD
UNLOAD
➁
➀
Shank
Plastic
Flute
Head
G 018