Remington Solar Solar Pool Ionizer and Purifier, Руководство по эксплуатации

Страница: 2 / 9

- 2 -
OPERATING INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
READ AND FOLLOW ALL INSTRUCTIONS
WARNING : To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at
all times.
WARNING: The sole purpose of this product is for use as a pool water purifier/ionizer as described in this manual; any
modification or other use will void the warranty.
WARNING: Do not use if unit is damaged in any way.
WARNING: Unit must be floating in pool water when exposed to sunlight or warranty is void.
WARNING: This unit is not compatible with/in pools where biguanide sanitizer(s) is/are in use. CAUTION : If Solar
water purifier is not working as it should or has been dropped or damaged in any way ,please contact your dealer .
SAVE THESE INSTRUCTIONS
(you can use this unit with the protective screen or without )
PRELIMINARY ASSEMBLY (WITH THE PROTECTIVE SCREEN)
Anode Screen and Nylon Screw Brush Test strips
PRELIMINARY ASSEMBLY(WITHOUT A SCREEN)
Anode Brush Test strips
Unpack all contents of package – be sure to look inside the insert for parts. Read all instructions before assembling:
1. Inspect the solar panel for any visual damage or imperfections which may have occurred during shipping. If any discrepancies are noticed,
contact your dealer .
2. Lay the unit face down on a smooth surface.
3. With one hand, hold the spring electrode down in a compressed condition to avoid interference.
4. Thread either end of the mineral electrode clockwise onto the silver metal screw stud inside the coil electrode at the center of the unit
5. Tighten snugly by hand, about a quarter turn, after contact with the black rubber seal at the base.