6
CLEANING & MAINTENANCE
Your nose, ear and eyebrow trimmer is designed to give you years of comfortable
use. To ensure that you get optimal performance from your trimmer, follow these
simple cleaning and lubricating tips:
• After each use, brush or blow accumulated hair from the cutting unit.
Rinsing Your Trimmer
• Your Remington® Washable nose, ear & eyebrow trimmer can be rinsed with
cool or warm water. Just hold the unit’s head under the faucet - it is not
necessary to remove the head first. Do not use hot water.
• If the trimmer needs additional cleaning, the cutting head can be removed by
turning it 1cm counter-clockwise and pulling it off. Then blow out the
accumulated hair or rinse it more thoroughly under running water.
• Afterward, shake excess water from the cutter head, making sure that all parts
are held together.
• Replace the head in the same position as it was removed, turning it 1cm
clockwise (to the right) until it locks into place.
Lubricating the cutters
• After rinsing the unit, apply a drop or two of mineral oil or baby oil to the
cutting teeth.
• Don’t apply too much oil, or it may spray.
• Finally, point the trimmer down and away from you, and turn it on. This spreads
the oil evenly and expels any excess.
This product conforms to radio frequency interference requirements.
Any product purchased and used commercially carries a limited 90 Day Warranty.
7
