Remii WM-50-XS, Инструкции по сборке, установке и эксплуатации

Страница: 19 / 24

INSTALLING WALL THERMOSTAT
WALL THERMOSTAT WIRING DIAGRAMS
NOTE: The wall thermostat will be functioning when the heater is on the
TEMP. setting.
Wire the wall thermostat prior to installing the fireplace.
WALL THERMOSTAT WIRING(24 VAC)
Install Wall Thermostat per instructions provided with kit and per the following
information:
19
INSTALLING WALL THERMOSTAT
WALL THERMOSTAT WIRING DIAGRAMS
stat will be functioning when the heater is on the
TEMP. setting.
Wire the wall thermostat prior to installing the fireplace.
WALL THERMOSTAT WIRING(24 VAC)
Install Wall Thermostat per instructions provided with kit and per the following
stat will be functioning when the heater is on the TEMP. setting.
Install Wall Thermostat per instructions provided with kit and per the following
1. Turn off circuit breaker.
2. Remove cover plate located
3. Pull the wire out and cut the inside thermostat. Connect the wires to the wall thermostat
as shown below. Follow the instructions provided with wall
cover plate located at the bottom on the left side of the appliance.
Pull the wire out and cut the inside thermostat. Connect the wires to the wall thermostat
as shown below. Follow the instructions provided with wall switch kit.
side of the appliance.
Pull the wire out and cut the inside thermostat. Connect the wires to the wall thermostat
.