II) Alarm 1 and 2 Set
You can only set the Alarm Mode directly on the unit while in Standby Mode.
A. Set Alarm 1
1)
The Alarm Time is defaulted to 6:00AM and the default wake mode is Buzzer.
2)
Press “Alarm 1 On/Off” button and the Alarm 1 display will start
flashing
3)
Simply rotate the “Rotate & Select” knob to your desired alarm setting
time and press the “Rotate & Select” knob to confirm the time.
4) Choose the wake to mode by rotate the “Rotate & Select” knob until the display shows your desired
mode. You can choose wake to Buzzer, FM or USB Music (iPod) as shown below:
5) After you have set the alarm time and the wake to mode, simply press the “Rotate & Select” knob to
confirm.
B. Set Alarm 2
Press “Alarm 2 On/Off” button and simply repeat the above 3) 4) 5) steps
C. Resetting and Alarm OFF function.
1) You can reset the both Alarm 1 and Alarm 2 at anytime by pressing the “Alarm 1 On/Off” button
and “Alarm 2 On/Off” button, the Alarm 1 or Alarm 2 display will show “OFF”
2) When either Alarm 1 or Alarm 2 is activated, press the “Alarm 1 On/Off” button and “Alarm 2
On/Off” button to turn off the Alarm. The Alarm will be reset and the display will show OFF.
3) If Alarm 1 or Alarm 2 is activated and no button is pressed, the Alarm will reset to off automatically
in 15 min.
D. Snooze Function
When alarm is sounding, you can press the SNOOZE button on the top panel to temporarily deactivate
the alarm for 9 minutes.
(Note):
