REMEHA Gas 120 ACE - 115, Руководство пользователя, Страница: 64 / 96

Code Display text Description Range Submenu
AM016 System Flow
Temp
Flow temperature of appliance. -25 °C - 150 °C Zone manager
Internal DHW
Tank DHW
Producer Generic
Gas fired appliance
Prod. manager bridge
AM018 T return Return temperature of
appliance. The temperature of
the water entering the
appliance.
-25 °C - 150 °C Zone manager
Internal DHW
Tank DHW
Gas fired appliance
AM019 Water pressure Water pressure of the primary
circuit.
0 bar - 4 bar Auto filling CH
Gas fired appliance
AM022 On / Off heat
demand
On / Off heat demand 0 = Off
1 = On
Gas fired appliance
AM027 Outside
temperature
Instantaneous outside
temperature
-60 °C - 60 °C Outdoor temperature
Gas fired appliance
AM033 Next Service Ind. Next service indication 0 = None
1 = A
2 = B
3 = C
4 = Custom
Gas fired appliance
AM037 3 way valve Status of the three way valve 0 = CH
1 = DHW
Gas fired appliance
AM040 Control
temperature
Temperature used for hot water
control algorithms.
0 °C - 250 °C Internal DHW
Gas fired appliance
AM046 Internet T.Outside Outside temperature received
from an internet source
-70 °C - 70 °C Outdoor temperature
AP078 Out sensor
detected
Outside sensor detected in the
application
0 = No
1 = Yes
Outdoor temperature
DM002 DHWFlowSpeed Actual DHW combi flow rate 0 l/min - 25 l/min Internal DHW
DM029 DHW setpoint Domestic Hot Water
temperature setpoint
0 °C - 100 °C Internal DHW
GM001 Actual fan RPM Actual fan RPM 0 Rpm - 12000 Rpm Gas fired appliance
GM002 Fan RPM setpoint Actual fan RPM setpoint 0 Rpm - 12000 Rpm Gas fired appliance
GM008 Actual flame
current
Actual flame current measured 0 µA - 25 µA Gas fired appliance
Tab.50 Navigation for installer level
Level Menu path
Installer
> Installation Setup > CU-GH08 > Submenu
(1)
> Parameters, counters, signals > Signals
(1) See the column "Submenu" in the following table for the correct navigation. The signals are grouped in specific functionalities.
Tab.51 Signals at installer level
Code Display text Description Range Submenu
Error code Holds the error code in case of
a warning, blocking or locking
0 - 65335 System Functionality
CurrOrUpcomServ
Notif
Current or upcoming service
notification
0 = None
1 = A
2 = B
3 = C
4 = Custom
Gas fired appliance
PowerActualU8 Actual relative power produced
for PDO output
0 % - 100 % Zone manager
Gas fired appliance
PM-P Int. Interface
ZoneSysPowerRe
ceptPM
Current system power received
from power manager of the
zone
0 % - 100 % Zone manager
9 Settings
64 MID _HMI T-control - Gas 120 ACE 7717201 - v03 - 25062019