REMEHA E-HP AW 168 Cool Plus B, Инструкция по установке и эксплуатации

Страница: 11 / 44

Unit 44 Cool Ace B 88 Cool Ace B 168 Cool Ace B
Nominal current (based on air 7 and temper­
ature of 55 °C of the water supply)
A 19.1 38.2 2x 43.2
Connection to boiler Inch 1 1/2" 2" 2 1/2"
Weight kg 460 790 2300
Refrigerant weight kg 14 18 36 (2x18)
(1) In case a supply temperature below 17 °C is requested, an external 4-way valve must be used.
(2) In accordance with ISO 9614-2 under condition A7/W55.
(3) The accumulated starting current is calculated with the stating current of the second compressor and the maximum operating current
(MCC) of the first compressor, seen as the worst-case scenario.
Tab.4 Technical parameters
E-HP AW E-HP AW 44
(Cool)
E-HP AW 88 E-HP AW 168
(Cool)
Air-to-water heat pump Yes Yes Yes
Water-to-water heat pump No No No
Brine-to-water heat pump No No No
Low-temperature heat pump No No Yes
Equipped with a supplementary heater No No No
Heat pump combination heater No No No
Rated heat output under average climate condi­
tions
(1)
Prated kW 23 53 112
Rated heat output under colder climate condi­
tions
(1)
Prated
kW - - -
Rated heat output under warmer climate condi­
tions
(1)
Prated
kW - - -
Declared capacity for heating for part load at in­
door temperature 20 °C and outdoor temperature
T
j
T
j
= -7 °C
Pdh
kW 19.2 46.8 98.6
T
j
= +2 °C
Pdh
kW 29.8 59.5 131.0
T
j
= +7 °C Pdh kW 34.1 68.3 155.2
T
j
= +12 °C
Pdh
kW 38.6 77.2 180.8
T
j
= bivalent temperature
Pdh
kW 20.0 46.8 98.8
T
j
= operation limit temperature Pdh kW 20.0 43.6 94.3
T
j
= -15 °C (if TOL < -20 °C)
Pdh
kW - - -
Bivalent temperature
T
biv
°C -10 -7 -10
Cycling interval capacity for heating
Pcych
kW - - -
Degradation co-efficient
(2)
Cdh
— 0.99 0.99 0.99
Seasonal space heating energy efficiency under
average climate conditions
ƞ
s
% 161 168 174
Seasonal space heating energy efficiency under
colder climate conditions
ƞ
s
% - - -
Seasonal space heating energy efficiency under
warmer climate conditions
ƞ
s
% - - -
Declared coefficient of performance or primary
energy ratio for part load at indoor temperature
20 °C and outdoor temperature T
j
T
j
= -7 °C
COPd
- 2.82 3.29 3.30
T
j
= +2 °C
COPd
- 4.10 4.23 4.43
T
j
= +7 °C COPd - 4.85 4.93 5.23
T
j
= +12 °C
COPd
- 5.55 5.43 6.03
T
j
= bivalent temperature
COPd
- 2.82 3.29 3.30
T
j
= operation limit temperature COPd - 2.82 3.02 3.10
3 Technical specifications
7697291 - v.05 - 11032022 11