REMEHA Celcia 20, Быстрый запуск

Страница: 15 / 32

15
7
The display shows “ MINUTE ”. Use the arrow
keys to select the correct number of minutes
and press “
OK ”.
21 21 18 18 15 15 12 12 9 9 6 6 3 3
P A R T Y P A R T Y
P R O G P R O G
E C O E C O
0 0 24h 24h
1 2 3 4 5 6 7
fig. 12 115817LTGBCEL012
8
The display shows “ TEMP 1 18.4 ”. Use the
arrow keys to select the correct temperature
code and press “
OK ”.
21 21 18 18 15 15 12 12 9 9 6 6 3 3
P A R T Y P A R T Y
P R O G P R O G
E C O E C O
0 0 24h 24h
1 2 3 4 5 6 7
fig. 13 115817LTGBCEL013
9
The display shows “ END ”. Wait 3 seconds and
begin again from step 3 until you have entered
all of the switch points.
21 21 18 18 15 15 12 12 9 9 6 6 3 3
P A R T Y P A R T Y
P R O G P R O G
E C O E C O
0 0 24h 24h
1 2 3 4 5 6 7
fig. 14 115817LTGBCEL014
Tip:
You want to set the switch program so that on a certain day the boiler comes on later
than the programmed time.
Example: You have programmed the boiler to come on from “
MO-FR ” at 7.30, but you
always have Friday off and don’t get up until 8.30.
Do the following:
1. Turn the rotary knob to “
MENU ”
2. Use the arrow keys to scroll to “ PROG ”. The display shows “ PROGRAM P1 ”.
Press “ OK ”
3. Use the arrow keys to scroll to “ DELETE ” and press “ OK ”
4. The display shows “ SINGLE ”. Press “ OK ”
5. Use the + arrow key to scroll to the day/time that you would like to change
6. To delete, press “
OK ” twice
7. Enter the new switch point as “ NEW POINT ” according to the instructions on the
previous page
You have now set your new Celcia 20. After setting the device, turn the rotary knob to
to activate the program. For more functions, please consult the full manual.
Binder1.pdf 14 Binder1.pdf 14 16-05-2007 09:04:24 16-05-2007 09:04:24