End
Recommended Operation of Semi-Auto Screen (SAS)
It is recommended to keep the screen (roll it up) if not in use.
Common issue when SAS Screen is left in down position overnight
If SAS Screen is left in down position overnight,
you may face some issue retracting ( rolling it up )
the screen the next day. The Kinetic energy in the
screen need to be “re-charge” by leaving the screen
in the kept position.
If it cannot retract by itself, please use your hand
to gently push the screen up.
** Remarks: After leaving it in the kept position for
about 5mins, Kinetic energy will be restored and screen
will be back to its original capability.
SAS Spring Strength Adjustment
Hey Look. This is
where the white
adjustment knob
is located.
White
Adjustment
Knob
Decrease Strength
Increase Strength
Fabric
Adjustment of Spring Strength
If SAS Screen is not able roll up fully (Kept Position), it is due spring power energy not enough.
Turn white knob as shown to “increase strength” of spring. Likewise if screen roll up too fast,
adjust white knob to “decrease strength”.
