Safety
3
März 2015
BA-PB3DUESEN_EN/ F0316700
1
Safety
The plasma generator has been built in accordance with the relevant international standards. As
with every technical product, however, the system may be dangerous in the case of unauthorized or
non-specified use.
In addition to the notes in these operating instructions, observe generally applicable safety
instructions.
Work with the plasma generator can be dangerous and result in serious - in some cases even fatal -
injuries. Therefore always protect yourself and others.
Caution
–
Danger!
Please mind and follow the safety advices and demands of this operation instructions, otherwise
serious
–
in some cases even fatal
–
injuries may result of the use of this device.
1.1
Residual dangers
This device has been produced with state-of-the-art technology. Nevertheless, residual risk can
never be totally excluded.
It is essential to observe the following safety instructions:
Caution
–
electrical voltage!
•
Danger from high voltage
- Never place your hands in the plasma jet.
- Never touch the plasma generator during operation.
- Never direct the plasma jet at persons or animals.
Caution
–
hot surface!
Temperatures of up to 200 °C are possible at the housing of the plasma generator.
- Wear protective gloves when handling the device.
- Wait until the device has cooled down.
Caution
–
damage to device possible!
By loosening the threaded connections the plasma generator can be destroyed.
-
Please follow the instructions in the operating and maintenance instructions for the plasma
generator.
-
Do not loosen any threaded connections which are not expressively necessary for nozzle
and electrode replacement.
