RELOOP MIXON 4
FIRMWARE UTILITY SETTINGS
This document describes all available firmware settings for MIXON 4 which
can be set on the device itself.
MODES & SETTINGS:
1. LED Check Mode
2. Firmware Version Check
3. En-/Disable LED Stand-by Sequence
4. Activate Vegas mode (LED Demo Mode)
5. Firmware Update Mode
6. Adjust LED back lit intensity
7. Adjust crossfader CUT-IN
Before launching any firmware mode, please disconnect the USB or iOS
cable, otherwise the set state may not be displayed properly.
Each firmware setting mode can be entered by holding a dedicated button
while powering on the unit. To save and exit a mode, power off the unit.
Revision v2 (11/16)
PLEASE REGULARLY CHECK FOR
UPDATES ON WWW.RELOOP.COM
