Reloop IM.8-13 Скачать руководство пользователя страница 5

12

ENGLISH

2.3.2 Chord Mode

Press  Scene/Shift  -5-  +  Chord  -14-  to  activate  chord  mode. 

When chord mode is activated, a whole chord will be played 
by pressing just one key. The chords are distributed on the key-
board as follows:

Notes:

Chords:

C(-1)-H(-1)

minor 4

C0-H0

minor 9

C1-H1 

minor 6

C2-H2

minor 7

C3-H3 

minor

C4-H4 

major

C5-H5

major 7

C6-H6 

major 6

C7-H7 

major 9

C8-H8

major 4

2.3.3 Scale

Press Scene/Shift -5- + Scale -17- to activate scale mode. There are 4 different modes at your disposal: major, minor, penta, blues. 
When scale mode is activated, only notes will be played that fit the selected scale.

2.3.4 Transpose

To transpose the keyboard by a halftone up or down, press Scene/Shift -5- + Transpose Halftones -18-. Repeat this step in order 

to transpose the keyboard by multiple halftones up or down.

2.3.5 Velocity

When the Velocity button -11- is pressed, all notes will be sent at maximum velocity (127), independent from their key-stroke. By 
pressing the velocity button again, this function will be deactivated.

2.3.6 Sustain

By pressing and holding the Sustain button -10-, the sustain MIDI command will be sent. Plug-ins that support this format will now 
let the played tone fade out slowly (similar to a sustain pedal of a piano).

2.3.7 Reset

By pressing the Reset Button -7-, all functions described under 2.3.2 - 2.3.6 will be deactivated.

3. ABLEToN fUNCTIoNS:

3. Mix Section:

3.1 

 .....Fader

3.2 

 ...Channel Rec

3.3 

 ...Channel Solo

3.4 

 ...Channel On/Off

3.5 

 ...Send 1

3.6 

 ...Send 2

3.7 

 ....PAN

 

3.1

3.7

3.5

3.6

3.3

3.4

3.2

Содержание IM.8-13







Отзывы: