8
7
Make a Call
To make a call, select the desired channel,
press and hold the PTT button, and speak in
normal voice. Please keep your mouth 1-2 in.
away from the microphone.
Receive a Call
Release the PTT button to receive a call. Select the desired
channel and adjust the volume to a proper level.
(See your dealer for setting-up the Scan List and Scan Functions.)
There must be at least two channels added in the scan list and the
scan function has been activated before the radio can start scanning.
STARTING SCAN
When switching to channel 16, the radio will begin to scan, and pause
after receiving signals.
STOPPING SCAN
When switching to channel 1-15, the radio will stop scanning.
Introduction:
1. Dealer can set the following two ways to restart scanning after its
pause:
1) Time-control
The radio will restart scanning after pausing for some time while
receiving signals. The pausing time can be preset from 0.5 to 5
seconds.
2) Carrier wave control
The radio will pause scanning after receiving signals and will
restart scanning 3 seconds after the signal disappears.
2. The working channel of the radio will respond to the following
channels automatically when pressing PTT button during scanning.
The dealer can select one among the following six ways.
1) Last called
When pressing PTT button, the radio will transmit from the last
channel that received a call.
2) Last used + currently working channel
When pressing PTT button during the scanning, the radio will
transmit from the last channel that received a call. When pressing
PTT button during the scanning pause, the radio will transmit from the
currently working channel.
3) Selected channel
When pressing PTT button, the radio will transmit from the first
channel of the scanning list.
4) Selected c currently working channel
When pressing PTT button during scanning, the radio will always
transmit from the first channel in the scanning list. When pressing
PTT button during the scanning pause, the radio will always transmit
from the currently working channel.
5) Priority channel
The radio will transmit signals from the priority channel in the scan
list when pressing PTT button.
6) Priority c currently working channel
When pressing PTT button during scanning, the radio will always
transmit from the priority channel. When pressing PTT button during
SCAN FUNCTION
