For those that wish to change the values in the Configurations parameters,
we recommend that you do this using the optional PC cable and software
available from Falcon Direct.
Completing your programming
After entering the Transmit CTCSS, DCS or OFF tone push the PTT to
advance through the final steps of Configuration Menu Programming. There
are ten (10) steps in the Configuration Menu programming. To complete
programming of your first channel, press the PTT button ten times.
The last item to be displayed on the screen will be NEXT CH. If you wish to
program on change another channel, turn the CHANNEL SELECTOR knob
to display the desired channel and follow the preceding steps. When you
have programmed your last channel, turn your radio OFF and back ON again
to complete programming. If you make a mistake during programming, you
can return to the step to be corrected by advancing through the end of the
channel programming and returning to the input to be corrected.
Note: The ten selections in the Configuration Menu are normally correct for
most users in the default setting. If you wish to use features such as 2-tone
paging, 2-tone encode, DTMF ID or other advanced features, we recommend
that you purchase the software kit, available from Falcon Direct for $49.95.
The manual programming described in this booklet is primarily for those who
have a need to change frequencies in the field. The PC kit is much faster for
general programming and always recommended for advanced feature
programming.
Warranty and Service Plans
If you prefer, we offer a special option package that includes programming of
the first sixteen channels with the special features of your choice and a one
year Next Day Exchange (N.D.E.) supplemental warranty program for $57. If
you have a problem during the first year, you simply call us at 1-800-489-
2611 and we send you a replacement radio with call tags for return of your
defective radio. This plan can be renewed for the second year for $37.
If you would like to add the N.D.E., please return your radio to Falcon Direct -
#36 – 20
th
Avenue NW – Birmingham, AL 35215 with desired programming
instructions and your check for $57 or credit card number as desired. If you
prefer, we will program your first 16 channels without N.D.E. for $20.
The normal factory warranty is two years covering parts and labor. Abuse,
antennas, and batteries excluded. If you are not covered by N.D.E., follow
the warranty return instructions provided in your Relm operating manual.
Telephone assistance in programming is available at a cost of $25 for up to
30 minutes of assistance with billing to your credit card by calling 1-800-489-
2611. Additional time, if required, will be billed at $15 per 15 minutes.
Other products from
We invite you to visit our web page at
www.falcondirect.com
for
additional information on products and services offered by Falcon
Direct. Thanks for choosing Falcon Direct – We appreciate you!
Monitor Receivers
Fixed, AC Type
Pagers
Voice Type
Radios
Mobile
Repeater
Stations
Globalstar
Satellite Phones
Intercom Systems
(Vehicular & Close Space)
Emergency
Call Buttons
Firefighter Rescue
Equipment