RELM RMU800A, Руководство по обслуживанию

Страница: 77 / 143

RMU800A SERVICE MANUAL
－
76
－
Model Set Mode
1. Turn power on while holding down [PF2], the radio enters Test Mode. The frequency test channel
and signalling test channel are displayed.
2. In Test Mode, press [PF3] to enter Adjustment Mode.
3. In Adjustment Mode, press [PF4] to enter Model Set Mode. “DESTINATION” and the model No.
are displayed.
4. Turn the Selector Knob to choose model 1-6.
5. Press [PF6] to confirm.
6. Press [PF3] to return to Test Mode.
Notes:
1. Once the new model is set, previous channel settings (frequency, CTCSS/CDCSS, channel
function settings) will be deleted, and part of functions are also changed. Therefore, do not make
this operation unless it’s very necessary, such as changing the EEPROM or FLASHROM, etc.
2. Initial Data Table
Model RX/TX
CH 1
(Center )
CH 2
(Low)
CH 3
(High )
CH 4 CH 5 CH 6 CH 7 CH 8
RX(MHz) 155.15 136.15 173.85 145.55 164.55 155.00 155.20 155.40
0
（
V
）
TX(MHz) 155.00 136.00 174.00 145.50 164.50 155.00 155.20 155.40
RX(MHz) 481.15 450.15 511.85 465.55 496.55 481.00 481.20 481.40
1
（
U2
）
TX(MHz) 481.00 450.00 512.00 465.50 496.50 481.00 481.20 481.40
RX(MHz) 375.15 350.15 399.85 362.55 387.55 375.00 375.20 375.40
2
（
U5
）
TX(MHz) 375.00 350.00 400.00 362.50 387.50 375.00 375.20 375.40
RX(MHz) 435.15 400.15 469.85 417.55 452.55 435.00 435.20 435.40
3
（
U1
）
TX(MHz) 435.00 400.00 470.00 417.50 452.50 435.00 435.20 435.40
RX(MHz) 465.15 440.15 489.85 452.55 477.55 465.00 465.20 465.40
4
（
U4
）
TX(MHz) 465.00 440.00 490.00 452.50 477.50 465.00 465.20 465.40
RX(MHz) 503.15 480.15 525.85 491.75 515.25 503.00 503.20 503.40 5
（
U3
）
TX(MHz) 503.00 480.00 526.00 491.70 515.20 503.00 503.20 503.40
RX(MHz)
425.15 400.15 449.85
412.55
437.55 425.00 425.20 425.40 6
（
U6
）
TX(MHz)
425.00 400.00 450.00 412.50 437.50 425.00 425.20 425.40