OPERATION
1. Open the diffuser by
carefully turning the
top ½ of the unit clockwise.
2. Remove the cotton filter holder (see illustration) under the lid,
by turning counter-clockwise. Set aside.
3. Fill the bottom half with 150 ml (5.25 oz ) of tepid (not hot) water. Remove the
cotton filter from the filter holder and allow it to soak in the water until its
completely soaked (5 minutes).
4. Make sure the spring is at the bottom of the filter holder. Insert the soaked filter
into the holder. Insert filter and holder under the lid. Twist clockwise to close.
5. Add a couple of drops of essential oils to the water. Reattach the top half of the
diffuser by turning clockwise.
6. Plug the USB cord into the diffuser and then into USB port or use AC adapter
(not included) and plug into wall socket.
7. Plug the Soft Touch power button (silver icon – illustration please) once to turn
on the unit. This will activate both the mist and LED colour changing lights.
8. Press a 2nd time to shut off the lights
9. Press a 3rd time to shut off the unit.
IMPORTANT
It may take up to 2 minutes before the mist is visible. The filter needs to be completely
soaked and may need extra time. This is normal. Once the unit begins to mist, it will run
6-8 hours.
