LIGHT FUNCTION
When first turned on, the unit defaults to colour-changing mode. To change co-
lours or brightness, press the light button. Each time the button is pressed, it will
change colour and/or brightness intensity.
Example
• Press the button once and the lamp will set on bright purple/pink light.
• Press a 2ND time, the light intensity will dim.
• Press a 3RD time, the lamp will set to a bright green/yellow light. Press again
and the intensity of the light will dim.
• To go back to colour-changing more, turn off the unit and start again.
Light Off Mode: Hold the light button for 3-4 seconds. The unit will mist without light.
CLEANING/CARE
1. Switch off the unit and unplug before cleaning or dismantling.
2. Take off both covers before carefully pouring out the water from the tank.
3. Clean the unit with a slightly damp cloth.
4. Add a small amount of vinegar on a cotton tip swab to clean the ultrasonic
plate. Do not use harsh detergents.
5. Never submerge the unit in water.
6. If used frequently, clean weekly to avoid essential oil residue build up or mildew.
TROUBLE SHOOTING
No Mist
• Check to see it the adapter is plugged properly into the unit and power source.
• Press the Power on/off button
• Check water levels, this unit has an auto shut off when water level drops too
low.
• If so, add water to the tank, not surpassing the 100 ml mark
• Make sure the ultrasonic plate is cleaned. If clogged, unplug the unit, remove
the covers, pour out the water and using a cotton swab dabbed in vinegar, clean
the plate and surrounding area.
• Make sure the covers are on securely
