REL HT/1003, Руководство по эксплуатации

Страница: 17 / 20

16
Power Saving Efficiency
All REL Sub-Bass System designs utilize a true Power On-Off switch that affords the owner the ability to
turn off their unit completely, without having to unplug the A/C mains cord. When a REL Sub-Bass System
is switched off using the Power On-Off switch on the rear panel it draws ZERO power.
In addition to the power switch there is an ALWAYS ON/STANDBY mode switch that has two positions.
Up engages the STANDBY circuit and down keeps the unit always on. In addition to the power switch there
is an ALWAYS ON/STANDBY mode switch has two positions. Up engages the STANDBY circuit and down keeps
the unit always on.
The HT/MKII features a standby mode that is enabled when the mode switch on the rear of the unit is set to
the “STANDBY” position. In this mode, the input signal is constantly monitored for audio activity. If not audio
information is detected over a period of 30 minutes, the unit will enter a low power standby mode in which
less power is consumed. When input signal activity is detected, the unit resumes normal operation. By using
the standby mode, you can ensure that there is no unnecessary power draw when the unit is not in use.
Note: Due to variations in program material, it is impossible to produce a perfectly reliable standby circuit.
Bass rich music or effects will consistently trigger our standby circuit whilst content that is low in volume and
possesses little or no bass cannot be relied upon to trip the standby function.
Alternatively, the user has the option to leave the unit in the normal operation mode at all times by selecting
the “ALWAYS ON” position of the power mode switch. Leaving a REL on produces the best sonic performance
and the most reliable operation. In this mode, the unit will not enter standby regardless of whether or not
there is activity at the input. Using this setting ensures that the HT/MKII is ready to react instantaneously to
bass transients, whether in music or films.
Model Power Draw at Standby Power Draw at Idle
HT/1205 MKII > 0.5 Watts 13 Watts
HT/1003 MKII > 0.5 Watts 10 Watts