REL Acoustics Habitat1, Руководство пользователя, Страница: 17 / 43

14
• If connecting a REL as a dedicated rear channel sub, connect the black wire of the REL to either the left
rear or right rear negative speaker terminal; connect the yellow wire to the left rear positive speaker
terminal; connect the red wire to the right rear positive speaker terminal.
LOW-LEVEL connection (via phono connector) is always an option if HIGH-LEVEL connection is not possible.
When connecting to the LOW-LEVEL inputs in a system in which HIGH-LEVEL connection is not possible,
such as if using internally-amplified speakers, connect a single phono cable between the LOW-LEVEL input
jack of the Longbow™ wireless transmitter and either the left or right channel output of your preamplifier.
Because virtually all sub-50Hz bass information is mono, there is no need to connect both left and right
channels.
When connecting to a home cinema system where a .1/LFE channel output is present, connect a single
phono cable between the sub output of the processor/receiver and the .1/LFE input jack on the Longbow™
wireless transmitter.
REL Theater Reference™ Home Cinema Applications
For Dolby Digital AC3 or other 5.1 theater systems, once the standard set-up for two-channel outlined
above is complete, the LFE output from the processor or receiver should be connected to the .1/LFE input
and appropriate volume adjustments made using the .1/LFE LEVEL control. For this configuration, you must
set the processor to the “large” or “full range” setting for the left and right speakers in order for the REL to
receive the bass signal via the high-level cable. In this configuration, the REL provides support for both the
left and right speakers for two-channel listening, and support for the LFE when movies are playing. Most
processors will allow you to defeat the subwoofer output when listening in the two-channel mode. The
effect of this set-up is one of greatly increased dynamics in the mid-bass range, no bass bloat, and a greater
degree of space and timing from the special audio effects.