REL Acoustics Gibraltar Series, Руководство по эксплуатации

Страница: 11 / 26

10
Remote Control Battery Installation
Gibraltar’s remote control unit requires two AAA ba2eries. These are not installed but are supplied. To
install or replace ba2eries in the remote control unit, first remove the bo2om aluminum cover by using the
supplied 2.5mm allen key to loosen the two visible screws. With the bo2om cover removed, you will see a
ba2ery holder which will accept two AAA ba2eries. Follow the images on the holder for proper orienta1on
of the ba2eries. A"er installing the ba2eries, test the unit by se3ng the SECURITY switch to UNLOCK and
turning one of the knobs. If the ba2eries are installed properly, you will see one of the red LEDs on the
remote control’s front panel illuminate. Replace the bo2om cover and 1ghten the two screws using the
supplied allen key. Ba2ery life can be extended if the SECURITY toggle switch is le" in the LOCK posi1on
when the remote control is not in use.
Remote Control Address Selec,on
The remote control unit provides an address selec1on func1on to allow mul1ple sub-bass systems to be
used in an audio system with a separate remote control for each. Addi1onally, if the remote control of the
Gibraltar interacts with any other piece of equipment in your system or if other remotes interact with your
Gibraltar, the address can be changed to avoid unwanted interac1on.
Always switch off your system before disconnec1ng any wires. To increase the versa1lity of connec1ng up,
Gibraltar has two separate stereo inputs: A Neutrik Speakon socket and two phono sockets. This is to facilitate
use with various system configura1ons.
The highFlevel, unbalanced, dualFchannel LstereoM input uses a Neutrik Speakon connector which is connected
to the power amplifier’s le" and right channel speaker terminals. This has the advantage of ensuring that the
REL receives exactly the same signal as the main speakers. This means that the character of the bass from
the main system is carried forward into the subFbass. This is a very important point and together with REL’s
Ac1ve Bass Controller LABCM, ensures far superior system integra1on of the subFbass with the main system.
There are two RCA sockets for lowFlevel connec1on to the output of a stereo preamplifier or receiver. Another
single RCA socket connects to the .1/LFE output of a home cinema amplifier or processor.
Connec,ng Up