Rekelaser Technology Co.,LTD
Shenzhen China
Maintenance
☆
.Please clean the lens regularly. Do not do it using the wet
cloth or other chemical. the clean times is depend on the using
frequency and surrounding condition; it is recommended that
should be cleaned every 20 days;
☆
Please clean the lighting surface and engine outlet regularly.
☆
Be sure that there is no flammable or explosive subject nearby.
The least distance is 0.5 meters. at the same time, keep more
than 15cm between the wall and laser lighting;
Warning
Power off before installation or maintenance;
The danger class of this laser lighting is CLASS
Ⅲ
B. it’s
dangerous for observing laser. The safe minimum distance is
13cm,the safe maximum time is 10 seconds;
Keep at least 0.5 meters distance between the lighting and
flammable material;
----------------- 4 -------------------
Thanks for your purchasing, please read this manual carefully
before operating the system.. It gives you general information for
your safe and better operation.
INSPECTION
Check for the contents in the package refer to the following list
:
1.REKE-02RG lighting: 1
2.3 PIN cable: 1
3. User’s manual: 1
