9.
Setup
Setup
Check and charge the powerbank before it’s first use to ensure you get the best
experience of the product out of the box.
Checking The Powerbank
To check the current charge level of the powerbank, press the ‘Power/Torch’ button
A
1
once. The 25%, 50%, 75% and 100% LED indicator lights
A
2
,
A
3
,
A
4
and
A
5
on the front will light up according to the available charge stored in the
powerbank. If the 25% LED
A
2
is flashing with no device connected, the
powerbank requires a full charge.
Charging The Powerbank
To charge the powerbank, you will need to use the micro USB port
A
9
or the USB
‘C’ port
A
8
. Connect a corresponding power cable to your chosen input and the
other end to a suitable mains power supply.
The micro USB
A
9
and USB ‘C’
A
8
ports are the only input charging points
on the powerbank. DO NOT use the USB ‘A’ ports
A
6
and
A
7
to charge the
powerbank.
A full charging cycle will take approximately 4 hours with a mains adaptor that
provides an output of 20V/2.5A using the USB ‘C’
A
8
port. Lower voltage and
amperage will take longer to charge the powerbank. A 5V/1A mains adaptor will
typically take approximate 12 hours to fully charge this powerbank. The current
charging level will be indicated by a flashing LED. The LED will light up solid once that
charge level has been reached. When all four LEDs (
A
2
,
A
3
,
A
4
and
A
5
) are
lit the powerbank is fully charged.
Always check the mains adaptor plug face for the output information.
Please refer to the Technical Data on page 14 for details regarding input charge.
Содержание PW008
Страница 1: ...20100mAH RUGGED POWERBANK User Guide ...