Assembly instructions
Instructions d’assemblage
Instrucciones de Ensamblaje
2019-11-13
www.rejuvenation.com
3/15
BEFORE YOU BEGIN (cont’d)
•
Make sure to observe all local plumbing codes.
•
Prior to installation, unpack and inspect both the console and marble top and porcelain lavatory for damage.
Locate the installation parts package and put in a safe place—you will need this for installation.
•
Do not dispose of any packaging or contents of the shipping carton until assembly is completed to avoid
accidentally discarding small parts or hardware
.
•
Installation assumes that walls and floor are plumb and level. Please make appropriate adjustments for other
conditions.
•
Remove any molding that may prevent the console from being set flush to the finished wall.
TOOLS AND MATERIALS
•
Tape measure
•
Pencil
•
Level
•
Drill with appropriate drill and driver bits
•
Eye protection
•
Clear 100% silicone adhesive caulk
•
Screws for securing vanity to building framing DO NOT USE WALL ANCHORS
•
Wood blocking - if building has steel wall studs or wall studs are not in appropriate locations
CARE INSTRUCTIONS
•
Dust often using a clean, soft, dry and lint-free cloth.
•
Immediately blot up spills, then wipe with a clean, damp cloth.
•
We do not recommend the use of chemical cleansers, abrasives or furniture polish on our finishes.
•
Hardware may loosen over time. Periodically check to make sure all connections are tight. Re-tighten if
necessary.
