REITEL SONIRET, Руководство по эксплуатации, Страница: 9 / 16

9
Troubleshooting
Device smokes (if used for the first time,
degassing of residues may be possible) 1. Heat to 50 degrees and run for 99
minutes,
2. if necessary, repeat the procedure and
perform with ultrasound
Device doesn’t start.
1. Check fuse in the building.
2. Check fuse in the device.
Device doesn’t start.
Check settings.
Device does not keep the set temperature
after connecting the voice coils. Voice coils emit additional heat during
operation. Adjust the temperature
accordingly by up to 10 ° C reduced.
Device doesn’t clean.
1. Check temperature settings.
2. Use cleaning liquid.
Short circuit. If water penetrates the housing switch off
device and pull the plug. Please contact the
customer service.
Maintenance
•
Regularly check the condition of the device. Pay attention to visible damage to housing or
power cord.
•
Regularly remove dust deposits on the cooling fan cover of the ultrasound source.
•
Regularly check the bottom plate of the cleaning tank for leaks.
Note
Clean and protect your device regularly with the REITEL stainless steel care spray
(order-no.: 90405000), to remove lime, plaster and dust as well as other contaminants
from the surface of equipment and to prevent corrosion. The spray creates a lasting,
water repellent protective film which keeps the equipment clean.