3
1 General Notes
1.1
General Safety Instructions
•
Check all hose joints for tightness, if necessary tighten hose clamps.
•
Operating instructions must be read and followed by all personnel who use this device
•
Furthermore, personnel should follow all local safety rules.
•
To avoid injury, appropriate protective clothing, noise absorption, protective eyewear and other tools have
to be used.
•
If the machine is defective or working improperly it must be taken out of service. Call your dealer
immediately then.
•
This device has been designated to be used only for its intended purpose. All other applications must be
prohibited for safety reasons.
•
In case of danger turn off the machine and call your dealer or manufacturer for help.
•
This device should not be left running while unattended.
•
Turn all power sources off after having finished work.
•
Repairs may be carried out only by experts. Persons doing repair take over responsibility for proper work
and adherence to accident-prevention regulations (UVV).
•
Only use original spare parts
•
Modifications may only be made after consultation with, and by permission of the manufacturer. In case of
modifications without permission all warranty and liability claims will expire.
•
The machine should be operated in a clean, air-conditioned room with a temperature of 15 to 35°C.
•
Danger of fire: Respect the fire regulations. Leave enough space around.
•
Don’t use mobiles near the machine since they may lead to disturbances.
•
Don’t place anything on top of the machine.
•
REITEL Feinwerktechnik GmbH assumes no liability for damages to surfaces
caused by equipment supports/feet.
1.2
Specific Instructions for this device
•
When opening the machine’s front please keep in mind that the grinding disc doesn’t stop
immediately after the machine has been turned off. Wait until it has stopped completely.
•
The ROTOGRIND NT is a table top machine. Supporting surfaces should be straight and
adequately stable
•
Please wear protection glasses during operation in case of dust exposure hazard.
•
Always use a wedging block when working on smaller pieces.
•
Put the working piece on the model tray first and then press it towards the grinding disc.
•
Never put your hand into the running device.
•
Only turn the machine on again when the grinding disc is completely standing still.
•
Don’t use worn or damaged grinding discs.
Investment material and modern grade 4 plaster reduce durability of grinding discs. Metal and quartzous
material shouldn’t get in touch with diamond grinding discs.
