REITEL RETOMAT, Руководство по эксплуатации

Страница: 2 / 20

II
Dear Customer!
The RETOMAT laboratory furnaces are specially designed for precious and non-precious
alloys and model casting. The EASY controller is ideally suited for speed investment or as a
second furnace in large laboratories. The controller is easy to use enabling target
temperature setting with only a few programming steps. Temperature stays evenly in the
chamber because of the four-sided heating element and optimum chamber insulation. The
furnace door is upward opening.
Any other use or usage beyond this scope is considered unintended use. The manufacturer
shall not be responsible for any damages that may result thereby.
Prior to installation of the device operating instructions and especially the safety instructions
must be read and followed by all personnel who use this device.
After having unpacked the device, please check carefully whether transportation damages of
any kind have occurred. If that is the case, the carrier or manufacturer must be notified within
3 days. The company will not be responsible for any damages found after that.
These operating instructions must be read and followed by all personnel who use this device.
Store it at a safe place near the device. This documentation is protected by copyright.
Transmittal or reproduction of this document in whole or in part and disclosure of its contents
is not permitted. If the operation manual gets lost an extra copy can be ordered from the
manufacturer at a nominal fee.