REITEL DUSTY MINI, Руководство по эксплуатации

Страница: 9 / 20

9
Installation
The equipment delivered is ready for immediate use. The sealed plug can be connected
directly to the mains supply 230 V/16 A. For installation please refer to safety notes in
chapter 2.
Installation
1. Ensure that the suction is switched off with the on/off switch (1).
2. Plug the power cable into a properly installed and fused socked with earthing contact.
Hose installation
1. Introduce the hose coupling (3) into the inlet fitting (2) of the suction (see Detail 1).
2. Check tight fit of the suction hose (3).
Filter Installation
1. Open the retaining clamps (7) and remove the upper section of the suction unit (5) (see
Detail 2).
2. Take the fleece filter basket (Detail 3) out of the lower section of the suction unit.
3. Put the filter bag properly on the inlet fitting in the dirt tank (see Detail 4).
4. Reinsert the fleece filter basket (Detail 3).
5. Reinstall upper section of the suction unit (5) and close the retaining clamps (7) (see
Detail 6).
Connection of power tools
Note:
To comply with regulations, only approved dust producing tools may be connected. The
maximum power consumption of the connected electrical
appliance is stated in “Technical
data chapter 9. The operating instructions incl. safety instructions for the connected tool
have to be adhered to.
1. Ensure that the suction is switched off with the on/off switch (1).
2. Switch off the power tool.
3. Put the end of the suction hose (3) with the coupling bush to the power tool.