10-307 Edit.2 Page
2
(
5)
INTRODUCTION
The Radial Clamp is designed to fasten accessories with round post, 20 mm, to an accessory rail of an
operating table. Also posts with diameter 18 and 16 mm can be used in this clamp. The clamp is of
“hook on” model with eccentric quick lock. This clamp shall not be used in applications, where a high
bending torque can appear in the accessory, directed towards and across the operating table. For
example leg holders, knee supports and other equal accessories. In those cases shall the clamp 10-304 or
10-305 be used.
ABOUT USERS MANUAL
This user manual is for clinical personnel, service personnel and others who need the knowledge about
and understanding of how the radial clamp works and how it can be used.
Read user manual carefully before using the equipment.
Always follow the instructions in user manual.
Always keep the user manual in range of the equipment.
INSTALLATION
At the unpacking, check for any kind of damage and that all parts are received according to the delivery
note. Also check for loose parts in the box. The packing material consists of cardboard and plastic,
which all can be recycled.
GENERAL DESCRIPTION
The Radial Clamp fits on an
accessory rail, 25 x 10 mm.
Lock the clamp to the rail
by turning the locking
handle 90 degrees to the
right or to the left.
Put the clamp into a
position where the rail fits
into the upper groove.
