10-398 Edit.2 Page 2 ( 4
)
INTRODUCTION
The 10-398 Arm & Hand surgery table is designed to fit several different operating tables when arm
and hand surgery shall be performed. The table is made from carbon fiber laminate for excellent x-ray
fluoroscopy facilities. The thin plate with cutouts gives very good access for the surgeon
On the rear end there is an accessory rail for infusion stand and anesthetic frame.
ABOUT USER MANUAL
This user manual is for clinical personnel, service personnel and others who need the knowledge about
and understanding of how the arm & hand surgery table works and how it shall be used.
Read user manual carefully before use of the equipment.
Always follow the instructions in user manual.
Always keep user manual close to the equipment.
INSTALLATION
At the unpacking, check that there are no damages to the equipment and that there are no loose parts in
the box. The packing material consists of cardboard and plastic which can be recycled.
IMPORTANT SAFETY DIRECTIONS
When attaching the arm & hand surgery table to the operating table, the responsible personnel
must be sure of that the arm & hand surgery table is properly fixed to the operating table by the
two locking knobs.
Check before every use that there are no damages that can make the use hazardous.
The arm & hand surgery table is designed for a Safe Working Load of 32kg. To keep the safety
factor according to the European standards 60601 and 60601-2-46 the Safe Working Load shall
not be exceeded. Overload can cause injuries to the patient or the personnel and damage to the
equipment
MAINTENANCE AND CARE
Cleaning
Clean with mild soap detergent with PH 6-8 and warm water. Dry with soft cloth. Do not
use alcohol or strong detergents containing strong acids or bases.
Control
Check daily for any kind of damage that can make the use hazardous. Also check the
locking function.
Annual service
Once a year the arm & hand surgery table shall be carefully cleaned. Threads shall be
lubricated with thin waterproof grease. Locking functions shall be tested. Damaged or
worn parts shall be replaced.
Service and preventing maintenance must only be done by for this purpose educated personnel.
Changing of any part of the construction without a written permission from the manufacturer is strictly
forbidden. Transgression will be prohibited.