Reiner speed-i-Marker 940, Руководство по эксплуатации, Страница: 85 / 92

Recognising and removing interferences 85
ERNST REINER GmbH & Co. KG
7.4 Acoustic Signals
Signal Cause Rectification Notes
Continuous
tone Print speed is not ok Check imprint Continuous movement
necessary
1 sound
impulse
-
Print start
-
Print end
-
When in stepping function and
if, while the dial is in
F , the
print trigger is activated
1 sound
impulse
every 10
seconds
-
No or a defective print cartridge
-
Wrong print cartridge
-
Ink level writing error
-
Print cartridge not inserted
correctly
-
Rechargeable battery empty
-
No rechargeable battery/
defective rechargeable battery
Insert ink
cartridge
Insert print
cartridge correctly
Charge the
rechargeable
battery
Insert/replace
rechargeable
battery
The detailed cause and
rectification can be
determined in the status
display
of the PCset
graphic software
2 sound
impulses
every 30
seconds Print cartridge almost empty Check print
3 sound
impulses
every 10
seconds Print cartridge empty Replace print
cartridge
4 sound
impulses Lock is open Close lock
-
Risk of ink drying
-
The signal becomes of
higher frequency and more
penetrating, the longer the
lock remains open
-
The signal ends when the
lock is closed again or a
new imprint is carried out
-
The display appears after
30 seconds of non-use in
standard ink, after 10
seconds in MP2 ink and
after 6 seconds in MP3 ink
5 sound
impulses
per minute Battery nearly flat/capacity low Charge/replace
rechargeable
battery