Reiner D28b, Инструкция по эксплуатации, Страница: 4 / 12

GB GB
u
Resting the back of the ink pad inside the
pad cradle slide the pad into the slot of
the stamp.
u
In order to return to the print position,
simply push down on handle .
To park the stamp _ Fig.
5
To prolong the life of the inkpad,
park the stamp!
u
Press and hold button on the front plate.
u
Gently push handle downwards until the
stamp clicks & locks in a raised position.
u
In order to return to the print position,
simply push down on handle .
To set the stamp wheels
_
Fig.
1
+
2
+
3
u
Press the handle to the bottom of its
travel, then while still holding it.
u
Press and hold button on the front plate.
u
Allow the handle to move upwards until
the handle locks in place.
u
You will be able to move the stamp wheels
freely with the stylus .
u
In order to return to the print position,
simply push down on handle .
You can easily place the date or the number one
position further!
(Not valid for the stamp Model D28c.)
u
Press the switch button once.
This applies to the stamp D28bN:
u
To automatically place the number one
position further in every stamping process,
rotate the rotary switch 90°.
To insert the inkpad
_
Fig.
1
+
4
Handle with caution to avoid dirt from ink!
u
Press the handle to the bottom of its
travel, then, while still holding it.
u
Press the button on the front plate and
continue to hold it.
u
Allow the handle to move upwards until
the handle locks in place.
u
Unpack the inkpad carefully.
u
Squeeze the grips on the back of the
inkpad and hold them.
A
A
A
B
B
F
E
A
B
J
A
A
A
K
C
D
A