cyberJack® RFID universal manual
22
5
Safety notes
Organisational safety measures:
Make sure that unauthorised persons do not obtain access to the card reader. The reader must be
operated such that abuse is excluded.
Make sure that the PC possesses suitable protective measures (such as a virus scanner, firewall)
and manipulation by unauthorised persons is prevented.
Each time the chip card reader is used, take care to check that the chip card reader and the security
features (e.g. seal) are intact.
Pay regard to the status of the device which is displayed to you via the LED (refer to the
).
Follow the screens on the display through the process of secure PIN input (the so-called PIN dialog,
refer to the
Secure PIN input function chapter
).
The safety of small children
The devices and accessories may contain small parts. Keep these out of reach for small children.
General safety note
Do not put any foreign bodies in the card slot. On no account should you throw the device into a fire.
Care and maintenance
Your device was developed and manufactured with great care and should also be treated with care. The
following recommendations are to help you to ensure the long-term operation of your cyber
Jack
®
RFID
:
Do not use or keep the device industy or dirty environments. The movable parts and electronic
components may be damaged.
Do not keep the device in hot environments. High temperatures can shorten the service life of
electronic devices and distort certain plastics or make them melt.
Do not keep the device in cold environments. When the device thereafter returns to its normal
temperature moisture may form inside it and damage the electronic circuits.
Do not drop the device or expose it to blows or shocks and do not shake it. If handled roughly the
electronic circuits and mechanical fines inside the device may be damaged.
Refrain from using any harsh chemicals, cleaning solutions or strong cleaning agents to clean the
device.
Do not paint the device. The paint can make the moving parts stick together and prevent it from
working properly.
Clean the display and housing with a soft, clean and dry cloth only.
If a device is not working properly bring it to your institute or back to the specialist dealer where you
bought it.
Disposal of old electronic devices
This symbol on the product, or its packaging, points out that it must not be disposed of with the
domestic waste. Instead bring it to a collection point for electronic devices which passes the product
on for recycling. By disposing of this product correctly you are avoiding potential harm to the
environment and health which can arise from its incorrect disposal. Besides, recycling materials spares
natural resources. Detailed information about recycling this product can be obtained from the
responsible authority in your town or community or from waste disposal companies.
24
7