Reiner 880 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 55

Reiner 880 Скачать руководство пользователя страница 3

3

Safety instructions

•

Reiner 880 complies with the relevant safety regulations for
information technology equipment, including electric office machinery

•

Unauthorised opening of the machine and improper repairs
can cause considerable danger (fire hazard)

To avoid the danger of crushing, do not insert your finger
between the baseplate and the print carriage.

•

Transport the machine only in its original package or other suitable
package that provides protection against shock and impact

•

If the machine is taken from a cold environment into a warm room,
dew may form on it. Wait until the machine has warmed up to room
temperature and is absolutely dry before starting to use it

•

Make sure that the local mains voltage corresponds
to the voltage stated on the mains unit

•

Reiner 880 performs the radio noise limits of class A.
In a living area may occure radio interferences. In this case
from the user can be required to carry out adequate funds

•

Ensure that the locally-installed mains socket with protective earth,
which you use for the machine, is readily accessible at all times

•

The machine has no ON / OFF switch; to disconnect it from the
mains you must disconnect the mains unit from the mains socket

•

Arrange the connection leads so that they do not create
a hazard (danger of tripping) and cannot be damaged

•

Take care that no objects (e.g. necklaces, paper clips, or liquids)
fall into the machine - danger of electric shock and short circuit

•

In an emergency, e.g. in the event of damage to the machine
casing, control elements or the mains lead, or if an object or liquid
falls into the machine, disconnect the mains unit from the mains
socket and inform your sales agent or our Service Department.

«
1
2
3
4
5
...
»

Содержание 880
























































Отзывы:

Нет отзывов