RECEIVER SPECIFICATIONS
Power Input:
12-24 Volt AC/DC
Relays:
10A 250 VAC/ 28VDC
12V:
50mA (idle)
1A (transmit)
24V:
25mA (idle)
500ma (transmit)
Range:
1/2 mile (Through obstructions)
Relays:
10A 250 VAC/ 28VDC
Minimum / Maximum Temperature Range:
-40°F to 185°F (-40°C to 85°C)
Security Encryption:
AES
POWER INPUT:
12 to 24 VOLTS AC/DC. - 1 AMP Minimum
Always follow polarity when DC Power is used.
BATTERY INPUT:
for 12 Volt Sealed Lead Acid (SLA) battery only.
Solid GREEN LED indicates battery charging. Momentarily flashing GREEN LED indicates battery is charged
and a trickle/conditioning charge is occurring.
3
. RECEIVER SPECIFICATIONS
1.
FCC ID: 2ASPO
TX-
100A: This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
IMPORTANT!
Any changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate this equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a
residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This
equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The
TX-100 while in use must have
a separation distance of at least 20 cm from all persons
, such as vehicle visor
mount or wall mount
,
and must not be co-located or operating in conjunction with any other antenna or
transmitter.
FCC Caution:
To assure continued compliance, any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this equipment.
(Example - use only shielded interface cables when connecting to computer or peripheral devices).
