REID LIFTING porta-gantry 1000, Руководство по сборке и эксплуатации, Страница: 13 / 19

25
PORTA GANTRY
500-3000
Variants & Options
The PORTA GANTRY jointed beams are delivered
pre-assembled
To continue assembling the PORTA GANTRY,
follow the instructions in the standard assembly
section
Secure one side using the countersunk bolts &
washers supplied
Jointed Beam [D-Section]
The jointed beam offers an alternative option
to our standard beams, the product comes in 2
parts for ease of transportation.
Jointed beams are not included in standard
range
. Each configuration should be assessed to
determine feasibility. [Max rating is 1000kg]
Notes for Correct Operation
Ensure all bolts in the joint are present and
tighten to 27Nm [20 ft lbs].
Avoid point loads on top of the joint.
The joint positioning must be 2/3 of the overall
length of the beam.
Ensure the trolley runs freely over the joint
before loading.
Secure the opposite side using the countersunk
bolts and washers provided
1
3 5
4
Slide the jointed beams together, ensuring the
internal guide blocks are aligned correctly
2
Dimensions
Beam length
Beam adjustment
Clear operating span
Height to lifting eye
Height increment
Height to top of beam
Width
Height to top of roller
PORTA GANTRY
A
E
B
F
C
G
H
D
A
F
C
H
G
D
B
E
Beam Height Adjustment
The height of each gantry beam is easily
adjusted by the release of 2 bolts on each
upright and can be easily and safely raised
into position by increments of 200 or 150mm
depending on product.
To assist with this activity a Geared Wheel
or Ratchet system is provided for the larger
gantries; manual on smaller frames.
Standard Beam Length A[mm] (Clear Operating Span C = A - 920 mm)
A [mm] 2500 3000 3920 4570 5500 6000 8400 9000
C [Min] [mm] 1180 1680 2200 2050 2980 3480 5880 6480
C [Max] [mm] 1580 2080 3000 3650 4580 5080 7480 8080
500 19 22 29 34 41 44 62 66
1000 19 22 29 34 41 44 79 84
2000 19 22 29 34 52 93* 130*
3000 19 22 37 43 85* 93* 130*
5000
39* 47* 61* 71* 85*
WLL Rating [kg]
Weight of Beams [kg]
*Clear operating span for D section beams is C = A - 910mm.
To ensure stability of the structure, the operating span of the beam must be equal to or greater than the distance between the castors on the A-frame
3