REI system 2000, Техническое руководство

Страница: 85 / 98

Form: 640188
TS-10
Video present on at least one
monitor, intermittent or not
displayed on one or more
monitors. Defective or improperly
installed video coax cable.
(P/N's may vary) Remove a monitor from a position
that does display video and re-insert
it into the position with the suspect
unit. If position now display Video
proceed to Defective Monitor
Possible Cause. If not, Check coax
connections, at the rear of the
monitor, and at the other end of the
cable. If the system has a Video
Distribution Amp the other end will
be at the amp. If not so equipped,
the cable will have to be traced back
to its connection point. Cable may
be verified by performing a
continuity check, or inserting a spare,
known good cable in its place.
Repair or replace cable as necessary.
Defective Slide Mount
(561004). Remove Monitor, check continuity
on coax cable that extends from the
rear of the unit. Repair or replace as
necessary.
Defective Monitor
(700182). If replacing suspect monitor corrects
the problem. Repair or replace the
Monitor.
Video displays noise or lines across
screen, all monitors.
VCP has dirty video heads. Clean heads with a high quality wet
style VHS cleaning tape. *Unit may
require professional cleaning.
Defective tape. Try a different tape that is known to
be good and/or try tape in a different
video machine.
Defective VCP (model may
vary). If cleaning does not correct the
problem, repair or replace unit.
VCP does not function remotely
from the Control Head (700227). Video System not operated
correctly Control Head must be placed in the
Video mode by depressing the
VIDEO button. Display will indicate
"VID".