REI R-905 Скачать руководство пользователя страница 5

7

4

(8) Scan Button
        Under radio mode, press this button to scan to the next stations. It will stay at any
        available station for 5 seconds and then scan to next available station unless
        interrupted by the user.

(9) Auto Button
        Press and hold this button to auto memorize the next available stations into the
        preset memory buttons. This function will erase previous memorized stations and
        store the newly searched stations. Press this button momentarily to scan through
        the (6) preset stations of the AM/FM band that has been selected. This button
        also functions as Weather Band Channel 7 button. Under weather band mode,
        pressing this button will select weather band channel 7 (162.550 MHZ).

(10) MODE Button
        Press this button to change input mode as follows:
        Radio—Weather Band—CD—AUX—Radio

(11) Auxiliary Input Jack
        The unit is equipped with a front panel 3.5mm auxiliary input so you connect
        your external portable audio player or portable satellite radio receiver. On the
        rear of the unit, there is a pair of RCA inputs to connect an additional auxiliary
        source.

(12) Volume/Select Knob
        Rotate the knob Clockwise or Counterclockwise to change the volume level.
        Press the knob to rotate through the following functions:
        VOL---BAS---TRE---BAL---FAD
        Upon choosing the function, rotate the knob to adjust the desired setting.
        PLEASE NOTE: After the Volume/Select Knob has not been adjusted for 5
        seconds it will automatically revert back to volume function.

Menu Operation
        Press and Hold for more than 2 seconds to choose. Once active, rotate the
        volume knob and click to select

        Seek DIS/LOC
        Selects Distance or Local Seek sensitivity setting.

        Clock 12/24
        Select 12/24 hours clock mode.

INSTALLING THE RADIO
1. First put the DIN collar in the hole opening,then, use the screwdriver to bend the   
   tabs outward as shown on the drawing below. 

4.When removing the radio, release the rear mount first and then insert the
    two release keys on either sides of the radio and pull the radio out.

2. Insert the radio in the DIN collar. 
3. Affix the rear mounting stud to the rear mounting bracket (option).

Отзывы: