
FEATURES OF THE CPM
9
REI
CPM-700
1
2
3
6
7
8
9
11
4
10
12
5
FRONT PANEL FEATURES
AUDIO GROUP
PHONES (1): Allows the use of silent headphone detection, disconnects the
internal speaker.
GAIN (2): Controls the Audio Gain (volume) to the speaker or Headphone
Output. Does not affect Record Out level.
FILTER (3): The audio Filter will “band-pass” the audio
response for voice levels by enhancing the 500 Hz to 2.5 kHz
frequencies. The Filter also removes much of the AC hum on
the Auxiliary Input, or video hum when using the RF Probe
Input. The Filter processes the audio for both the headphones and the
record-out jack.
Display shows whether filter is
IN
or
OUT
.
MONITOR GROUP
MODE (4): Sets the unit to its Search or Monitor function.
The SEARCH mode is used for performing a sweep. The
MONITOR mode is used after a sweep to check continually
for new devices.
Display shows whether Mode is
SEARCH
or
MONITOR
With the CPM in MONITOR mode, a new signal stronger than the
THRESHOLD level (see below) will cause the ALERT LED to flash, and the
CPM will make an audible TONE.