4
BUTTON OPERATION
1)
Power Button
Press and HOLD the Power Button to turn the unit ON or OFF. Once on, a quick
press and release will MUTE the audio.
2)
Tune Buttons
Press these buttons to select the PREVIOUS or NEXT track while in USB mode.
Press these buttons to tune AM/FM stations.
3)
Volume UP/DOWN buttons
Press either VOL+ / VOL- buttons to increase or decrease the volume level
4)
Band Button
Press this button to change radio bands as follows:
FM1—FM2—FM3—AM1—AM2
Press and HOLD this button to change between Clock and Mode Information display.
Press the button to select the desired FM or AM band.
5)
Auto Store / Seek Button
Press and hold this button for 2 seconds to auto program available stations into the
preset memory buttons. Quick press to auto SEEK up to the next station.
6)
Mode Button
Press this button to navigate between modes TUNER-USB-Bluetooth®-AUX.
NOTE
: USB mode will not appear unless a USB drive is inserted.
Press and HOLD to select BT PAIR, then quickly press again to access either:
BASS
(allows the user to adjust the BASS level)
TREB
(allows the user to adjust the TREBLE level)
BAL
(allows the user to adjust the BALANCE from left to right)
FAD
(allows the user to adjust the FADER from front to back)
LOUD
(selects either LOUDNESS ON or OFF)
EQ
(disables the tone settings and selects between OFF, FLAT, CLASS, POP, or ROCK)
AREA TUNING
(selects between USA & EUROPEAN frequency bands)
BEEP
(turns the audible beep ON or OFF with each key press)
TIME FORMAT
(selects between 12Hr and 24Hr formats)
Change using the VOL+/VOL- buttons. If either Volume buttons have not been
pressed for 5 seconds it will automatically revert back to the previous operation.
