REHM BOOSTER2 130, Краткое руководство

Страница: 4 / 12

4
The following safety instructions must be observed:
• Wear dry protective clothing, the eyes and face must be protected with a welding visor or
welding helmet (see VGB15).
• The unit is plugged into an earthed power outlet and is connected to power cables with a
properly grounded outlet.
• The unit switches off automatically in case of excessive temperature and automatically
switches back on after cooling down.
Caution: Put the electrode holder away in a safe place or hang it up so that the electrode
cannot strike and arc whilst in the thermal shutdown phase.
Alternatively: Remove the electrode
Caution: Non-observance may lead to a fire hazard.
• The unit may only be maintained by trained specialists
If you have any problems, please contact REHM Customer Service at +49 7161 3007-85.
When operating this unit, the accident prevention regulations for welding, cutting and related
processes (VGB 15) must be observed.
The main dangers are:
Fire and explosion
Hazardous substances (gases, vapours, smoke/dust)
Optical radiation
Electrical hazard
Handling errors
The units are designed for welding electrodes.
2 Safety instructions