Rehan ACUITY SPEECH, Руководство пользователя, Страница: 25 / 25

25 Acuity Speech
EN
Power Supply
Model: CGSW65-120-5000II
Input: 100-240VAC, 50/60Hz, 1.5A max.
Output: 12VDC, 5000mA max.
Power rating
Standby: 0.2W
Maximum: 60W
Dimensions
22” (screen in
highest position) 48 × 48 × 65 cm
18.9 × 18.9 × 25.6 inch
Weight 17 kg
Magnets
Speaker at the back of display:
<0.5mT at 10cm distance
Upper corners of display:
<0.5mT at 7cm distance
Remote control holder at tableau:
<0.5mT at 4cm distance
IP rating
IP20; solid foreign objects >= 12.5mm
Not protected against ingress of water
Preferred switch screen settings 1920 × 1080
Conditions of use
Temperature
5 to 40 ˚C
41 to 104 ˚F
Humidity 0 to 75%, no condensation
Conditions of
storage and
transport
Temperature
-25 to 70 ˚C
-13 to 158 ˚F
Humidity 0 to 90%, no condensation
FCC NOTICE (Class B)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may
cause undesired operation. Federal Communications Commission Statement.
EMI:
The Acuity Speech complies to harmonised standards according to medical devices
and with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.