ISSUED: 02-10-00 SHEET #: 024-9003-5 08-04-05
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-729-0307 or 708-865-8870.
3 of 3
E
Fasten all twelve screws (
C
) tight,
untill wall plate (
A
) is flush with wall.
Push toggler (
D
) through hole. Pull screw (
C
)
back untill toggler (
D
) hits the inside of the
metal stud.
Place screw (
C
) through
wall plate (
A
). Partially
fasten the toggler (
D
) to
the back of the screw.
Pivot ends of toggler (
D
)
90°.
∅
3/4"
(19 mm)
Drill 3/4" (19 mm) dia. holes
through drywall and studs.
Insert togglers (
D
) as shown
below...
Eight 1/4-20 x 1/2" phillips
screws (
B
) and eight washers
(
E
) are provided to attach
mount (sold separately) to
wall plate.
A
D
C
A
A
C
D
A
C
D
© 2005 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
• Make sure that mounting screws are anchored into the
center of the studs. The use of an "edge to edge" stud
finder is highly recommended.
WARNING
ALL OTHER MOUNTS
PLA-1
PLA-2
Note:
See below for quantity of fasteners and proper holes to attach wall plate to wall.
