12
Raz-AT600 User Manual
20170511
3.0 CLEANING AND MAINTENANCE
3.1 Cleaning After Each Use
3.1.1 Commode Pan
1. Remove the commode pan and empty contents.
2. Wash the pan with a multi-purpose disinfectant cleaning solution. Use a soft brush if needed.
3. Rinse well before storage or re-use.
NOTE: A soapy hot water wash followed by a disinfectant spray can be substituted for a multi-
purpose disinfectant cleaning solution.
3.1.2 Molded Seat
1. Spray with a multi-purpose disinfectant cleaner and scrub with a soft brush as required.
2. Rinse with a water spray before storage or re-use.
DO NOT IMMERSE
the seat in water or cleaning solutions.
3. For a more thorough cleaning, remove the seat from the shower chair to allow better access to
the underside of the seat and around the opening of the seat.
3.2 Cleaning As Needed
3.2.1 Adjustable Tension Back Upholstery
1. Remove the plastic buckles and tri-glides from the back upholstery straps, paying attention to
how the straps are wound through each component as they are removed.
2. Remove the back upholstery from the back frame and machine wash with a mild detergent in
warm water on a normal or gentle wash cycle. Include other strap accessories such as the H-
strap, pelvic and chest positioning straps.
3. Install the back upholstery and other positioning accessories on the chair and allow to dry.
DO NOT
dry the back upholstery in a clothes dryer or damage to the upholstery may occur.
4. Assemble all plastic buckles and tri-glides onto straps.
5. Adjust the straps to the desired tension.
3.2.2 Frame, Armrests, Adjustable Footrests, and Other Components
1. Spray the frame and components with a multi-purpose disinfectant cleaner, scrub with a soft
brush and rinse with water.
2. If necessary, spray the frame and components with a diluted (10 parts water to 1 part solution)
calcium/lime remover (such as CLR), scrub with a soft brush and rinse thoroughly with water.
DO NOT
mix a calcium/lime removal solution with any other liquid or toxic fumes may result.
It is recommended to the user that a qualified Raz dealer check over all fasteners and subassemblies on
a continuing basis or if there is cause for concern to the shower chair
’s performance.
Several times each year the shower chair and its components should be wiped down with a diluted
calcium/lime removal solution in order to reduce deposits, followed by a hot water rinse.
To reduce the risk of mildew buildup, the entire shower chair should be wiped down with a soft dry cloth
after the final rinse and before storage or use.
