1. Position the brace in the approximate position where you want to limit the
flexion/
extension
(fig.1)
2. Drive the screw/bolts into the hole marked with the appropriate angle value and check the correct
operation and the range of clock movements
(fig.2)
ATTENTION:
If the brace is equipped with 2 side splints, adjustment is done on each side splint separately
setting the same angle of flexion and extension. Side splints do not require maintenance
HOW TO SET UP THE FLEXION
AND EXTENSION IN
2RA PRECISION SPLINT - INSTRUCTION
The brace is equipped with a side splint with a
bending flexion (A)
in the scope of: 0
0
, 30
0
, 55
0
, 75
0
, 95
0
,
110
0
and
the extension (B)
in the scope of: 15
0
, 75
0
.
THE ANGLE OF FLEXION AND EXTENSION IS SPECIFIED BY THE DOCTOR
OR PHYSIOTHERAPIST!
REH4MAT
Ul. Piaski 47, 36-060 Głogów Małopolski | Polska
tel. +48 16 62 142 20
Fax +48 16 62 21 42 13 e-mail: [email protected] www.probraces.com www.reh4mat.com
©Reh4Mat 10/2021
fig.1
(A)
fig.2
( )
( )
( )
( )
( )
( )
( )
( )
(B)
