1. Place the brace in the position in which you want to adjust the
flexion (A)
or
extension (B)
(fig.1)
2. By pressing the buttons
(A)
and
(B)
- delimiters to the center of the splint move them around to the desired
place with the prescribed angle
(fig.1)
3. Look buttons with the special lockers
(D)
included in this kit
(fig.2)
4. Check the correctness of operation and the range of clock movements
ATTENTION:
If the brace is equipped with 2 side splints, adjustment is done on each side splint separately
setting the same angle of flexion and extension. Side splints do not require maintenance
HOW TO SET UP THE FLEXION
AND EXTENSION IN 1R ERGONOMIC
SPLINT - INSTRUCTION
This brace is equipped with two splitus with ROM adjustment
flexion (A)
in the scope of: 0°, 15°, 30°, 45°,
60°, 75°, 90°, 105°, 120° and
extension (B)
in the scope of: -30°, -15° , 0°, 15°, 30°, 45°, 60°, 75°, 90°.
THE ANGLE OF FLEXION AND EXTENSION IS SPECIFIED BY THE DOCTOR
OR PHYSIOTHERAPIST!
REH4MAT
Ul. Piaski 47, 36-060 Głogów Małopolski | Polska
tel. +48 16 62 142 20
Fax +48 16 62 21 42 13 e-mail: [email protected] www.probraces.com www.reh4mat.com
©Reh4Mat 10/2021
(A)
(B)
fig.1
fig.2
(D)
