Regulus LYRA 1000 VVS, Инструкция по установке и эксплуатации

Страница: 7 / 20

7 │
MOUNTING INSTRUCTIONS
WARNING! At least 20 °C and 4 persons are necessary to mount the insulation. All
threaded connections shall be sealed either with a thread sealant or with the gaskets
included in separate kits.
1. Remove the tank from its pallet and place it to its approximate position, shift the
bottom insulation under the tank.
2. Slide the insulation inserts into the openings for connections.
3. Fit on the front insulation part, then the rear insulation part.
Check the proper position of the insulation towards the
sockets prior to
fi nal fi xing. Use the jig to close the locks.