11
│
REGULUS - DUO N P Thermal Stores - www.regulus.eu
8 - Maintenance
If the tank is fitted with a heating element, disconnect it from the mains first. Clean the exterior of the tank with
a soft cloth and a mild detergent. Never use abrasive cleaners or solvents.
Check all connections for leaks.
The thermal stores come with an anti-corrosion sacrifice magnesium anode rod as standard. The condition of
the anode rod shall be checked within 12 months after commissioning and subsequently always not later than
12 months after the last check. In locations where water contains more ferrites or calcites, it is recommended to
check the anode rod every 6 months. If more than one third of its total volume is consumed, the anode rod shall
be replaced with a new one. Disregarded of its state, the magnesium anode rod shall be always replaced with
a new one within 24 months from commissioning.
When replacing the magnesium anode rod, first reduce the pressure in the thermal store to atmospheric
pressure, then reduce the pressure in the DHW tank. Replace the anode rod and pressurize the DHW
tank, then pressurize the thermal store.
If the tank gets damaged due to neglected replacement or wrong replacement procedure of the
magnesium anode rod, the warranty cannot be claimed.
9 - Disposal
Packaging shall be disposed of in compliance with the valid rules. When the product reaches the end of its
life, it shall not be disposed of as household waste. It shall be dropped off at a Local Waste Recycling Center.
Insulation shall be recycled as plastic and the steel vessel as scrap iron.
10 - Warranty
Transporting and/or storing the thermal store in a horizontal position is considered a breach of warranty
conditions!
