23
2.3.3
The order of reader use
1. Prepare the device for operation in accordance
with paragraphs 2.2.2–2.2.4.
2. Launch the User’s application and initialize
the
reader.
3. In the application settings, select (if necessary)
the required illumination parameters in accordance
with the device model;
4. Select a scanning startup mode: automatic
(scanning starts automatically when a document
covers the photo sensor) or manual (scanning
starts via the User’s application).
5. Set the appropriate scanning modes, as it
is described in the document
Test Application
(Readerdemo.exe). User’s Guide
.
6. To scan the document, place it facedown on
the object glass
2
.
ATTENTION!
MAKE SURE THAT THE DOCUMENT IS
IMMOBILE ON THE OBJECT GLASS DURING
THE WHOLE SCANNING PROCESS, I. E. UNTILL
THE OBTAINED INFORMATION APPEARS ON
THE PC MONITOR.
2.3.4 Scanning documents containing RFID
chips
As a rule, documents containing integrated RFID
chips are marked with the symbol
. In order to
read data from an RFID chip, place the document
