Regin product information
Regin product information
RU-FO
Room unit with fan switch and forced
ventilation for use with RCP
• Awarded design
• Simple installation
• Built-in temperature sensor
• Cable for connection between the room unit and the
RCP controller is available as accessory
RU-FO is a room unit from the Regio series. It has a
switch for controlling a three-speed fan (fan coil). It
should be connected to one of the Regio Maxi controllers
RCP100F, RCP100FT, RCP200F or RCP200FT.
Regio
Regio is a wide series of controllers which handle heating
and cooling.
The controllers are divided into three different series,
Mini, Midi and Maxi. Mini are pre-programmed,
stand-alone controllers. The Midi controllers are pre-
programmed with communication. The Maxi group, to
which RU-FO belongs, consists of freely programmable
controllers with communication.
Applications
The Regio controllers are suitable in buildings where you
want optimal comfort and low energy consumption, for
example offices, schools, shopping centres, airports, hotels
and hospitals etc.
Design
The room units have a modern design. The
design has been awarded the 2007 “iF product
design award”.
Sensor
The room unit has a built-in sensor.
Easy to install
The modular design with a separate bottom plate for
wiring makes the whole Regio series easy to install and
commission. The bottom plate can be put into place
before the electronics are installed. Mounting is directly
on the wall or on an electrical connection box.
Connection to RCP
The room unit is connected to the RCP-unit with an
RJ12-cable, max length 30 m. Regin has two cables as
accessories, RU-CBL3 (length 3 m) and RU-CBL10
(length 10 m).
product
design
award
2007
RU-FO is a room unit intended for use together with
Regio Maxi controllers.
revision
09 2009
